Monitoring The Power Supply In A Junos Space Appliance - Juniper Junos Space JA2500 Hardware Manual

Monitoring the Power Supply in a Junos Space Appliance

Purpose
Copyright © 2014, Juniper Networks, Inc.
Monitoring the Power Supply in a Junos Space Appliance on page 77
Monitoring the RAID Array for the JA2500 Junos Space Appliance on page 78
This topic applies to the Junos Space JA1500 and Junos Space JA2500 appliances.
For optimal performance of the Junos Space appliance, verify the condition of the power
supply module or modules installed in the appliance.
NOTE: Routinely check the LED on the power supply module. The Power
Supply Module LED is green when the power supply module is powering the
appliance, and amber when the power supply module is on but not powering
the appliance (standby mode). If there is a problem with the power supply
module, the Hardware Fault LED, located on the front panel of the appliance,
starts blinking and an alarm sounds.
For information on how to replace an AC power supply module, see
the AC Power Supply Module on a Junos Space Appliance" on page
information on how to replace a DC power supply module, see
the DC Power Supply Module on a Junos Space Appliance" on page
Chapter 8: Monitoring the Hardware
"Replacing
91. For
"Replacing
95.
77