Powering Off Using The Management Console; Powering Off Using The Appliance Power Switch - Juniper Junos Space JA2500 Hardware Manual

JA2500 Junos Space Appliance Hardware Guide

Powering Off Using the Management Console

Powering Off Using the Appliance Power Switch

70
You can power off the Junos Space Appliance from the Junos Space CLI by using the
management console.
Before you begin, do the following:
Connect the Junos Space Appliance to a management console. Refer to
a Junos Space Appliance to a Management Console" on page 41
Configure a console terminal or terminal emulation utility to use the following serial
connection parameters:
Baud rate: 9600 bits per second
Data: 8 bits
Flow control: None
Parity: None
Stop bits: 1
Ensure that the appliance is booted and the console displays the login prompt.
To power off the appliance using the management console, do the following:
At the console login prompt, log in to the appliance as the admin user.
1.
The Junos Space Settings Menu appears.
Type , which is the
6 (Debug) run shell
2.
You are prompted to enter your password.
Type the password for the admin user and press Enter.
3.
You are taken to the shell.
To power down the appliance, execute the following command:
4.
[root@host ~]# poweroff
The appliance displays output messages on the management console and then
powers off. When the appliance is powered off, the green Power LED on the front
panel of the appliance goes out; in addition, the Power Supply Module LED turns
amber.
To power off the Junos Space Appliance using the appliance power switch, do the
following:
Locate the appliance power switch on the back panel of the appliance chassis.
1.
Press the power switch and release it.
2.
The appliance displays output messages on the management console and then
powers off.
for more information.
option.
Copyright © 2014, Juniper Networks, Inc.
"Connecting