Installing The Appliance; Unpacking The Ja2500 Junos Space Appliance - Juniper Junos Space JA2500 Hardware Manual

CHAPTER 5

Installing the Appliance

Unpacking the JA2500 Junos Space Appliance

Copyright © 2014, Juniper Networks, Inc.
Unpacking the JA2500 Junos Space Appliance on page 31
Mounting the JA2500 Junos Space Appliance on page 32
Front-and-Rear Mounting the JA2500 Junos Space Appliance Flush to a Rack on page 32
Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a
Rack on page 33
Midmounting the Junos Space Appliance in a Two-Post Rack on page 34
The JA2500 Junos Space Appliance is shipped in a cardboard carton along with the items
listed in Table 17 on page 32.
CAUTION: The JA2500 appliance is maximally protected inside the shipping
carton. Do not unpack it until you are ready to begin installation.
WARNING: The shipping dimensions of a JA2500 appliance are 17.81 in x
17.31 in x 3.5 in (45.2 cm x 44 cm x 8.89 cm), and the appliance shipping
weight is 28.05 lb (12.72 kg).. Use the correct lifting technique when you move
the appliance. (Refer to
Appliances" on page 126
To unpack the appliance, do the following:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
ensuring that you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Pull out the packing material holding the appliance in place.
4.
Read the "General Safety Guidelines and Warnings" on page 113
5.
Remove the appliance from the shipping carton.
6.
"Chassis Lifting Guidelines for Junos Space
for more details.)
carefully.
31