Changing The Password For The Default User - Juniper Junos Space JA2500 Hardware Manual

Changing the Password for the Default User

Copyright © 2014, Juniper Networks, Inc.
Ensure that you have logged in to the appliance using the administrator username
(admin) and password.
When you log in to the appliance, the Junos Space Settings Menu appears as follows:
Junos Space Settings Menu
1> Change Password
2> Change Network Settings
3> Change Time Options
4> Retrieve Logs
5> Security
6> (Debug) run shell
A> Apply changes
Q> Quit
R> Redraw Menu
Choice [1-6,QR]:
NOTE: Password changes take effect immediately. Any other changes that
you make to the settings do not take effect until you apply the changes. You
can apply the changes from the Junos Space Settings Menu or any sub-menu
by typing at the prompt. Irrespective of the menu or sub-menu that you are
A
in when you apply changes, all changes to the appliance settings are applied.
This topic includes the following sections:
Changing the Password for the Default User on page 59
Changing Network Settings on page 60
Changing the Time Zone and NTP Servers on page 62
Retrieving and Transferring System Log Files on page 62
Changing Firewall and SSH Settings on page 63
Accessing the Shell on page 63
Applying or Cancelling Changes to Settings on page 64
You can change the password for the default user (admin) for the Junos Space Appliance.
To change the password, do the following:
On the Junos Space Settings Menu, type
1.
Type when you are prompted to change the password for the admin user.
2. y
Enter the current password and press Enter.
3.
Chapter 7: Performing Initial Configuration
1 at the prompt.
59