Changing Firewall And Ssh Settings; Accessing The Shell - Juniper Junos Space JA2500 Hardware Manual

Changing Firewall and SSH Settings

Accessing the Shell

Copyright © 2014, Juniper Networks, Inc.
Junos Space Network Management Platform retrieves the log files on all cluster
(fabric) nodes and combines the log files into a tar file. After the file is created, you
can copy the file onto a USB device.
Alternatively, to transfer the log files using SCP, type
the CLI.
Junos Space Network Management Platform retrieves the log files on all cluster
(fabric) nodes and combines the log files into a tar file. After the file is created, you
can transfer the file to a remote server.
Type to apply all the changes that you made, or type
A
3.
Settings Menu without applying the changes.
By default, the firewall and SSH are enabled on the Junos Space Appliance.
NOTE: We recommends that, in most cases, the firewall should remain
enabled. However, if you are using Junos Space Service Now to send e-mail
or SNMP notifications or using Junos Space Service Now through a proxy
server, then you must disable the firewall. In addition, if Junos Space Service
Now is running in a multi-node fabric (node cluster), then you must disable
the firewall across each node in the fabric.
To change the firewall and SSH settings, do the following:
On the Junos Space Settings Menu, type
1.
(Optional) To change the firewall setting:
2.
If the firewall is currently enabled, type
If the firewall is currently disabled, type
(Optional) To change the SSH setting:
3.
If SSH is currently enabled, type
If SSH is currently disabled, type
Type to apply all the changes that you made, or type
A
4.
Settings Menu without applying the changes.
You can access a shell and run shell commands that can help during debugging. Do the
following:
On the Junos Space Settings Menu, type
1.
You are prompted to enter a password.
Type the password for the administrator (admin user).
2.
Chapter 7: Performing Initial Configuration
and follow the prompts on
2
to return to the Junos Space
M
at the prompt.
5
to disable the firewall.
1
1 to enable the firewall.
to disable SSH.
2
2 to enable SSH.
to return to the Junos Space
M
6 at the prompt.
63