Rack - Juniper Junos Space JA2500 Hardware Manual

Related
Documentation
Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a Rack
Copyright © 2014, Juniper Networks, Inc.
To mount the JA2500 appliance front and rear flush to a rack, do the following:
Insert four rack-mount screws on each side of the appliance to secure the front of the
1.
chassis to the equipment rack.
Slide the rear-mount rail brackets into the backs of the front rails on either side of the
2.
chassis and align with your rear equipment rack posts, as shown in
Secure the rear-mount rail brackets to your equipment rack with two rack-mount
3.
screws each.
Insert locking screws on the sides of the rear-mount brackets to secure the front and
4.
rear mounting brackets in place.
Figure 6: Front-and-Rear Mounting Flush to a Rack
Verify that the mounting screws on one side of the rack are aligned with the mounting
5.
screws on the opposite side and that the appliance is level.
Front-and-Rear Mounting the JA2500 Junos Space Appliance Recessed in a Rack on
page 33
Junos Space Appliance Rack Requirements on page 25
Midmounting the Junos Space Appliance in a Two-Post Rack on page 34
Tools and Parts Required to Install the Junos Space Appliance on page 26
This mounting option provides additional front clearance in the equipment rack. It is used
for a larger chassis that requires additional support when mounted on the rack-mount
system.
To mount the JA2500 appliance front and rear recessed in a rack, do the following:
Remove the rear screws on each side of the appliance's front rails and the two small
1.
screws toward the front of the chassis.
Loosen the side-rail screws of the chassis and slide the front rails of the system
2.
backward, as far as they will move.
Chapter 5: Installing the Appliance
Figure 6 on page 33.
33