Rear Panel Of A Ja2500 Appliance - Juniper Junos Space JA2500 Hardware Manual

JA2500 Junos Space Appliance Hardware Guide
Table 4: JA2500 Appliance Front Panel Components (continued)
Component
Ethernet (LAN) port LEDs
Hard drive LEDs
Related
Documentation

Rear Panel of a JA2500 Appliance

Table 5: JA2500 Appliance Rear Panel Components
Component
Cooling fans
Power switch
6
Description
The following LEDs are present above each Ethernet port:
Link/Activity LED (green), which indicates the link (On) or link activity (Blinking)
Speed LED, which indicates the link speed:
Off—10 Mbps
Green—100 Mbps
Yellow–1000 Mbps or 1 Gbps
In addition to the LEDs on the appliance chassis, there are two LEDs on each hard disk:
Hard Disk Activity LED (green), which indicates disk activity
Hard Disk Failure LED (red), which indicates disk failure (On) or disk rebuilding (Blinking)
Rear Panel of a JA2500 Appliance on page 6
Chassis Physical Specifications for the JA2500 Appliance on page 4
Junos Space Appliance Overview on page 3
The rear panel of the JA2500 Junos Space Appliance, shown in
consists of the components listed in
Figure 2: JA2500 Rear Panel
1— Cooling fans
2— Power switch
Table 5 on page 6.
3— Redundant power supply module slot
4— Power supply module
Description
The JA2500 appliance has two hot-swappable cooling fans
that provide the required airflow to cool the appliance.
The appliance power switch is used to power on or power off
the appliance.
Copyright © 2014, Juniper Networks, Inc.
Figure 2 on page 6,