Backup/Restore-Saving And Recalling All Data And Settings As A Single File; Setup Files-Saving And Loading - Yamaha Genos Reference Manual

Backup/Restore—Saving and Recalling All Data and Settings as a Single File
On page 2/2, you can back up all data saved in the User drive (except Expansion Voices/Styles) and all settings of the
instrument to a USB flash drive as a single file named "Genos.bup."
Before calling up the display, you need to make all desired settings on the instrument.
Touching [Backup] saves the backup file to the root directory of the USB flash drive.
Touching [Restore] calls up the backup file and all data and settings are replaced.
If you want to include audio files, enter a checkmark to the "Include Audio files" beforehand.
NOTE
• Before using a USB flash drive, be sure to read "Connecting USB Devices" in the Owner's Manual.
• The [USB TO DEVICE] terminal underneath the instrument cannot be used when backing up or restoring the data.
NOTE
• You can back up User data such as Voice, Song, Style, and Registration Memory by copying them individually to a USB flash drive on the File Selection display.
• If the total size of the target data for backup exceeds 1.9 GB (excluding Audio files), the backup function is not available. If this happens, back up the User data by copying
the items individually.
NOTICE
Completing the backup/restore operation may take a few minutes. Do not turn off the power during backup or restoring. If you turn off the power
during backup or restoring, data may be lost or damaged.
Setup Files—Saving and Loading
For the items below, you can save your original settings to the User drive or the USB flash drive as a single file for
future recall. If you want to save the setup file to the USB flash drive, make sure to connect the USB flash drive to the
[USB TO DEVICE] terminal beforehand.
NOTE
Before using a USB flash drive, be sure to read "Connecting USB Devices" in the Owner's Manual.
1
Make desired settings on the instrument, then call up page 2/2 of the Factory Reset/
Backup display.
2
Touch [Save] of the desired item.
System
MIDI
User Effect
3
Select the desired destination to save the Setup file, then touch [Save Here].
Assign the name if necessary, then touch [OK] to save the file.
To call up the setup file:
Touch [Load] of the desired item, then select the desired file.
You can restore the factory programmed status by selecting the Setup file in the "Preset" tab.
148
Genos Reference Manual
Parameters set on the various displays such as "Utility" are handled as a single System Setup
file. Refer to the Data List (Parameter Chart) on the website for details on which parameters
belong to System Setup.
The MIDI settings including the MIDI templates on the internal User memory are handled
as a single MIDI Setup file.
The User Effect settings including the following data can be managed as a single file.
• User Effect types (page 120)
• User Master EQ types (page 117)
• User Master Compressor types
• User Vocal Harmony/Synth Vocoder types (pages 110, 114)
• User microphone settings (page
(page 122)
107)