Huawei NE40E Hardware Description page 269

NE40E
Hardware Description
Name
LINK/ACT
MGMT-ETH
LINK (green)
MGMT-ETH ACT
(yellow)
Table 1-206 Management interfaces
Interface
Name
USB
CF SLOT
CTL-ETH-
SFP0,
CTL-ETH-
SFP1
MGMT-E
TH
Console
AUX
Issue 01 (2018-05-03)
Description
If this indicator is steady on, the link is Up.
If this indicator is off, the link is Down.
If this indicator is blinking, data is being transmitted and received.
If this indicator is off, no data is being transmitted or received.
Interfac Connec
e Type tor
Type
USB 2.0 USB
Type A
CF card TYPE II
standard
(compati
ble with
TYPE I
standard
)
GE SFP
Ethernet
RJ45
interface
(10M/100
M/1000
M
Base-TX
autonegot
iation)
RS-232 RJ45
serial
interface
RS-232 RJ45
serial
Description Cable
The USB -
interface
functions are
uN/Available
and reserved.
It is used to -
hold a CF card
as a mass
storage device.
Reserved -
cascading
interface.
It connects to Super category 5 shielded twisted
an NMS and pair
can work in
half-duplex or
full-duplex
mode.
It connects to 8-core shielded cable
the console for
on-site system
configuration.
Baud rate: 9600
bit/s (default
value), which is
configurable.
It connects to 8-core shielded cable
the modem for
1 Hardware Description
255