Related Manuals for Huawei ATN 905
Summary of Contents for Huawei ATN 905
- Page 1 ATN 905 Multi-service Access Equipment V200R002C01 Product Description Issue Date 2013-05-30 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
- Page 3 ATN 905 Multi-service Access Equipment Product Description About This Document About This Document Purpose This document describes the networking application, functions, structure, features of the ATN 905 device. Note the following precautions Currently, the device supports the AES and SHA256 encryption algorithms. AES is reversible, while SHA256 is irreversible.
- Page 4 ATN 905 Multi-service Access Equipment Product Description About This Document Symbol Description Indicates a hazard with a low level of risk, which if not avoided, could result in minor or moderate injury. WARNING Indicates a potentially hazardous situation, which if not...
- Page 5 ATN 905 Multi-service Access Equipment Product Description About This Document Change History Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues. Changes in Issue 01 (2013-05-30) This document is the first release of the V200R002C01 version.
- Page 6 ATN 905 Multi-service Access Equipment Product Description Contents Contents About This Document........................ii 1 Product Positioning and Features....................1 1.1 Positioning..................................1 1.2 Product Highlights................................6 2 Product Features and Functions....................8 3 Product Operation and Maintenance..................25 4 Hardware Structure........................30 4.1 Indoor ATN 905 Devices.............................30 4.2 Outdoor ATN 905 Devices............................34...
- Page 7 ATN 905 is small-sized, light-weighted, and low power-consuming case-shaped equipment used to carry mobile services from small-cell base stations or enterprise leased line services. Carrying mobile services from small-cell base stations: ATN 905 can be installed in various indoor and outdoor environments and supports plug-and-play, improving the network deployment efficiency and reducing the operating expense (OPEX).
- Page 8 In the Huawei mobile bearer solution, ATN 905 functions as bearer equipment for small-cell base stations and benefits: Anywhere: ATN 905 is available in the indoor and outdoor types and can be installed in various environments where small-cell base stations are installed.
- Page 9 SR/BRAS NOTE In the IPRAN macro base station backhaul network solution, ATN 905 is supported in the following modes: l Native IP mode: If IPRAN uses a Layer 3 solution, such as, the hierarchy VPN (HVPN) solution, it is recommended that ATN 905 connect to the IPRAN macro base station backhaul network in Native IP mode, which facilitates deployment of end to end (E2E) Layer 3 IP connectivity and performance check schemes.
- Page 10 ATN 905 belongs. With the help of the current IPRAN, ATN 905 can connect to the IPRAN macro base station backhaul network. On the E2E ATN+CX network, enhanced ATN functions, such as DCN plug and play and RFC 2544-compliant IP FPM, can be deployed to improve the network operation and maintenance efficiency.
- Page 11 905 can connect to a service router (SR) or broadband remote access server (BRAS). NOTE ATN 905 can connect to a carrier network in Native IP mode or Native ETH mode based on service deployment on the intermediate access network.
- Page 12 ATN 905 Multi-service Access Equipment Product Description 1 Product Positioning and Features 1.2 Product Highlights High Adaptation to Installation Environments Anywhere: This product is available in indoor and outdoor types. It is compact, light, and adaptive to various installation environments.
- Page 13 ATN 905 Multi-service Access Equipment Product Description 1 Product Positioning and Features management, quality of service (QoS) policy management, and VPN service management for this product. Precise Clock Solutions This product supports physical layer frequency synchronization and IEEE 1588v2 time synchronization to provide high precision clock synchronization.
- Page 14 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Product Features and Functions The following table shows the features and functions of an ATN 905. Table 2-1 ATN 905 Product Features and Functions Features and Functions Description Interface Features A maximum of 3 POE-enabled ports.
- Page 15 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Ethernet VLAN l Port number-based VLAN Features division. l Inter-VLAN port isolation. l VLANIF interfaces. l MAC address limit. l Unknown unicast/multicast/ broadcast suppression.
- Page 16 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Simple Traffic Supports simple traffic classification Classification not only on physical interfaces but also on logical interfaces: l Ethernet interface, Ethernet sub- interface, Layer-2 Ethernet interface.
- Page 17 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Complex Traffic During complex traffic classification, Classification packets are classified by source/ destination address, source/ destination port number, protocol type, or other attributes. Traffic is...
- Page 18 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Traffic Policing CAR is mainly used for rate limit. In the implementation of CAR, a token bucket is used to measure the data flows that pass through the interfaces...
- Page 19 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Traffic URPF Traffic Collects statistics on the overall traffic Statistics Statistics discarded by the URPF (Unicast Reverse Path Forwarding) check. HQoS Traffic Supports statistics on flow queues,...
- Page 20 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description SSHv2 l Supports as the STelnet client and server. l Supports as the SFTP client and server. l Supports SSH 1.5 and SSH 2.0.
- Page 21 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Ethernet OAM Supports Ethernet performance Performance management in accordance with ITU- Management T Y.1731. The NMS can periodically collect end-to-end performance data about a service stream from the device and generate a statistics report accordingly.
- Page 22 Supports the BMC algorithm for dynamic clock source selection (based on the priority and clock stratum). Table 2-2 ATN 905 Product Features and Functions Features and Functions Description Interface Features A maximum of 3 POE-enabled ports. One port provides a maximum of 130 NOTE W power supply capability.
- Page 23 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Physical-layer clock synchronization and 1588v2 time synchronization. NOTE 1588v2 frequency synchronization is not supported. To implement 1588v2 time synchronization, configure physical-layer frequency synchronization first.
- Page 24 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Diff-Serv Model Multiple service flows can be aggregated into a Behavior Aggregate (BA) and then processed based on the same Per-Hop Behavior (PHB). This simplifies the processing and storage of services.
- Page 25 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Complex Traffic During complex traffic classification, Classification packets are classified by source/ destination address, source/ destination port number, protocol type, or other attributes. Traffic is...
- Page 26 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Traffic Policing CAR is mainly used for rate limit. In the implementation of CAR, a token bucket is used to measure the data flows that pass through the interfaces...
- Page 27 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Traffic URPF Traffic Collects statistics on the overall traffic Statistics Statistics discarded by the URPF (Unicast Reverse Path Forwarding) check. HQoS Traffic Supports statistics on flow queues,...
- Page 28 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description SSHv2 l Supports as the STelnet client and server. l Supports as the SFTP client and server. l Supports SSH 1.5 and SSH 2.0.
- Page 29 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description Ethernet OAM Supports Ethernet performance Performance management in accordance with ITU- Management T Y.1731. The NMS can periodically collect end-to-end performance data about a service stream from the device and generate a statistics report accordingly.
- Page 30 ATN 905 Multi-service Access Equipment Product Description 2 Product Features and Functions Features and Functions Description RFC2544 IETF RFC2544 defines a series of test solution that describes performance of interconnected equipment on a network. Device supports RFC2544 test function ,which includes initiating-end test and reflecting-end test.
- Page 31 ATN 905 Multi-service Access Equipment Product Description 3 Product Operation and Maintenance Product Operation and Maintenance The following table shows the operation and maintenance of an ATN 905. Table 3-1 ATN 905 Product Operation and Maintenance Operation and Description Maintenance...
- Page 32 ATN 905 Multi-service Access Equipment Product Description 3 Product Operation and Maintenance Operation and Description Maintenance Supports device operation and management by Configuration the Huawei iManager U2000 network management system through SNMP. l Supports SNMPv1/v2c/v3 and the client/ server architecture.
- Page 33 ATN 905 Multi-service Access Equipment Product Description 3 Product Operation and Maintenance Operation and Description Maintenance Three user authentication modes, which authenticate and authorize users through command lines and SNMP. l Local authentication. l RADIUS authentication. l HWTACACS authentication. Supports inband and outband NMS interfaces.
- Page 34 ATN 905 Multi-service Access Equipment Product Description 3 Product Operation and Maintenance Operation and Description Maintenance System Test and Supports the debugging of running services, including online recording Diagnosis of key events, packet processing, packet parsing, and status switching of services at specified time, which serves as powerful support for device commissioning and networking.
- Page 35 ATN 905 Multi-service Access Equipment Product Description 3 Product Operation and Maintenance Operation and Description Maintenance Remote Mirroring Supports remote mirroring to locate the problems such as voice services on the network deteriorate, or mosaics appear in some videos, in...
- Page 36 Hardware Structure 4.1 Indoor ATN 905 Devices ATN 905 devices are small-sized and can be installed on a desk or in a standard IEC60297 cabinet (19-inch) indoors. Indoor ATN 905 devices are 1 U high and do not support board removal or installation.
- Page 37 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Table 4-1 Visible components of an indoor ATN 905 device Item Category Silk Screen Description Interfaces AC power input interface AC 100 V to 240 V Indoor ATN 905 devices require AC 50 Hz/60 Hz;...
- Page 38 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-2 Core connections of the management cable connected to the NM network interface or NM serial interface ETH/OAM 1 Transmit positive of the NM interface 2 Transmit negative of the NM interface...
- Page 39 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Status Description Indication On (red) A device hardware fault has occurred. On (orange) The logic is not loaded. l The device is not powered on. l The device is not started.
- Page 40 Interfaces of an outdoor ATN 905 device are located on the system control board and interface board. Boards are fixed into the device. The main difference between the two models of outdoor ATN 905 devices is that they have different interfaces.
- Page 41 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-3 Appearance of an outdoor ATN 905 device with the maintenance cover closed Device status indicators Maintenance cover As shown in Figure 4-4 Figure 4-5, appearances of outdoor ATN 905 devices configured with different boards are different in that they have different internal interfaces.
- Page 42 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-4 Appearance of an outdoor ATN 905A device with the maintenance cover opened NM network interface or NM serial interface Service SFP interfaces GE0-GE1 Reset button Service electrical interfaces...
- Page 43 SFP interface status indicators Reset button Service electrical interfaces FE/GE1-FE/GE3 ALMI/ALMO Cabling hole Table 4-9 Structure descriptions of outdoor ATN 905 devices Item Category Silk Screen Description Interfaces AC power interface AC 100 V to 240 V Outdoor ATN 905 devices require AC 50 Hz/60 Hz;...
- Page 44 FE/GE electrical interfaces support PoE. FE/GE3 supports a maximum output power of 130 W power (non-standard PoE, mainly used for Huawei small base station devices) while FE/GE1 and FE/GE2 shares 60 W power consumption. Issue 01 (2013-05-30) Huawei Proprietary and Confidential Copyright ©...
- Page 45 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-6 Core connections of the management cable connected to the NM network interface or NM serial interface ETH/OAM 1 Transmit positive of the NM interface 2 Transmit negative of the NM interface...
- Page 46 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Status Description Indication On (orange) The logic is not loaded. l The device is not powered on. l The device is not started. Table 4-12 Descriptions of the power status indicator (PWR)
- Page 47 – When an ATN device is operating at a temperature outside the range of -20 °C to 60 ° C (for example, -40 °C to 65 °C), industry modules apply. Electrical modules for ATN 905 are all SFP modules, which are used to support FE or GE services.
- Page 48 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-7 eSFP optical module appearance Single-fiber Two-fiber bidirectional bidirectional NOTE eSFP optical modules are further classified into single-fiber bidirectional modules and dual-fiber bidirectional modules. l A single-fiber bidirectional module provides only one LC interface for connecting to one fiber. It receives and sends optical signals in one fiber but over two different wavelengths.
- Page 49 Optical module code S4015755 S4015715 34060282 FE Optical Module (industry) The ATN 905 supports use in the range of -40°C to 65°C only if industrial optical modules are used. Table 4-17 describes technical specifications of the interface on the FE optical module.
- Page 50 S4015715 34060282 GE Optical Module The ATN 905 supports the swappable single-fiber bidirectional optical module and swappable two-fiber bidirectional optical module. A two-fiber bidirectional GE optical module uses two LC optical fibers to receive and transmit optical signals. Table 4-18 describes the technical specifications of the interface on the two-fiber bidirectional GE optical module.
- Page 51 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Item Specification Working 770 to 860 1270 to 1360 1260 to 1360 1500 to 1580 For details, wavelength range (nm) wavelength allocation of 1000BASE- CWDM optical interfaces and related optical module code.
- Page 52 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Optical Wavelength (nm) Optical Wavelength (nm) module code module code 34060482 1524.5 to 1537.5 34060480 1604.5 to 1617.5 Table 4-20 Technical specifications of the GE optical interface (single-fiber bidirectional) Item...
- Page 53 Product Description 4 Hardware Structure GE Optical Module (industry) The ATN 905 supports use in the range of -40°C to 65°C only if industrial optical modules are used. The ATN 905 supports the swappable single-fiber bidirectional optical module and swappable two-fiber bidirectional optical module.
- Page 54 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Item Specification Working wavelength range Tx: 1260 to 1360 Tx: 1480 to 1500 (nm) Rx: 1480 to 1500 Rx: 1260 to 1360 Mean launched optical power -9 to -3 -9 to -3...
- Page 55 4.4.1 AC Power Cables and Ground Cables AC power cables are used to provide external power supplies for the ATN 905 device while the PGND cable is used to ground the ATN 905 device.
- Page 56 The AC power cable that complies with the China national standard is used as an example here. Indoor AC Power Cables Indoor AC power cables are used to provide external power supplies for the ATN 905 device. Figure 4-10 shows the appearance of the AC power cable used for an indoor ATN 905 device Table 4-27 lists the technical specifications of the AC power cable.
- Page 57 AC power cable that complies with the China national standard is used as an example here. PGND Cable The PGND cable is used to ground the ATN 905 device. Each PGND cable consists of a cable and one or two OT terminals.
- Page 58 Yellow 4.4.2 Ethernet Cables On the ATN 905, Ethernet cables are used to input and output Ethernet service signals. Ethernet cables are also referred to as network cables and can be classified into straight-through cables and crossover cables according to the connection sequence of the copper cores in the cables.
- Page 59 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-12 Appearance of the shield layer Figure 4-13 shows the appearance of the non-shielded cable. Figure 4-13 Appearance of the non-shielded cable RJ45 connectors are used at both ends of a network cable.
- Page 60 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-15 Structure of the network cable RJ-45 network interface Label 1 Main label Label 2 connector NOTE For a crossover cable, pins 1 and 2 of the RJ45 connector at one end must be cross-connected to pins 3 and 6 of the RJ45 connector at the other end respectively.
- Page 61 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Crossover Cable for FE Interface Crossover Cable for GE Interface Connecto Connect Color Relation Connector Connect Color Relation r X1 Pin or X2 Pin ship X1 Pin or X2 Pin ship X1.3...
- Page 62 4-16. For an optical fiber that connects an optical port on the ATN 905 to an optical port of another type on the peer device, an LC/PC connector is used at one end and a connector of another type is used at the other end.
- Page 63 4-17 shows the appearance of an outdoor optical fiber. Figure 4-17 Appearance of an outdoor optical fiber Outdoor optical fibers used by ATN 905 devices are multi-mode optical fibers that use DLC/ PC connectors at both ends. NOTE DLC is short for Duplex LC.
- Page 64 Product Description 4 Hardware Structure 4.5.1 Cabinet Support This section provides common cabinets that can house ATN 905. APM30H Outdoor Cabinet The APM30H outdoor cabinet supports IP55 protection rating and can be used outdoors. The APM30H is an outdoor cabinet with heat exchangers. It supports AC power supply and DC power distribution, and can provide a 7 U installation space for user devices.
- Page 65 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-19 Internal structure of an APM30H outdoor cabinet Table 4-34 lists the technical specifications of the APM30H outdoor cabinet. Table 4-34 Technical specifications of the APM30H outdoor cabinet Item...
- Page 66 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Figure 4-20 Appearance of an IMB network cabinet Figure 4-21 Internal structure of an IMB network cabinet Table 4-35 lists the technical specifications of the IMB network cabinet. Table 4-35 Technical specifications of the IMB network cabinet...
- Page 67 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Item Specifications Allowable internal heat ≤ 300 W consumption Protection rating IP31 19-inch Open Rack 19-inch open racks apply to Class-A indoor installation environment. A 19-inch open rack provides a 45 U installation space for user devices.
- Page 68 ATN 905 Multi-service Access Equipment Product Description 4 Hardware Structure Item Specifications Available installation space 45 U (1 U = 44.45 mm) Issue 01 (2013-05-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
- Page 69 ATN 905 Multi-service Access Equipment Product Description 5 Product Technical Specifications Product Technical Specifications Physical Specifications Table 5-1 Technical specifications of the chassis Technical Description Specifications Dimensions (width x l indoor 905: 250 mm x 180 mm x 43.6 mm (9.84 in. x 7.09 depth x height) in.
- Page 70 ATN 905 Multi-service Access Equipment Product Description 5 Product Technical Specifications Item Description Running ong-term operation: 10% to 90%; Short-term operation: 5% to 95% relative humidity Running ≤ 4000 m (13123.2 ft) [If the altitude is lower than 1800 m (5905.44 ft), the altitude equipment works normally.
- Page 71 ATN 905 Multi-service Access Equipment Product Description 5 Product Technical Specifications Reliability Specifications Item Description MTBF 199998 hours MTTR 2 hours System usability 0.99999 System Configurations Item Description Switching capability l indoor 905: 6 G bit/s (6 G bit/s in either egress...
- Page 72 ATN 905 Multi-service Access Equipment Product Description A Acronyms and Abbreviations Acronyms and Abbreviations Authentication, Authorization and Accounting AAL5 ATM Adaptation Layer 5 Access Controller Access Control List Assured Forwarding ANSI American National Standard Institute Access Point Address Resolution Protocol...
- Page 73 ATN 905 Multi-service Access Equipment Product Description A Acronyms and Abbreviations Customer Edge CHAP Challenge Handshake Authentication Protocol Class of Service Center Processing Unit CR-LDP Constrained Route - Label Distribution Protocol Destination Address Accounting Direct Current Data Communication Network DHCP...
- Page 74 ATN 905 Multi-service Access Equipment Product Description A Acronyms and Abbreviations Generic Traffic Shaping High availability HDLC High level Data Link Control HTTP Hyper Text Transport Protocol iVSE Integrated Value-added Service Engine ICMP Internet Control Message Protocol Internet Data Center...
- Page 75 ATN 905 Multi-service Access Equipment Product Description A Acronyms and Abbreviations Label Distribution Protocol Label switching Edge Router Line Processing Unit Label Switched Path Label Switch Router Media Access Control MBGP Multiprotocol Border Gateway Protocol Message Digest 5 Management Information Base...
- Page 76 ATN 905 Multi-service Access Equipment Product Description A Acronyms and Abbreviations Provider Edge Packet Forwarding Engine Parallel Interference Cancellation PIM-DM Protocol Independent Multicast-Dense Mode PIM-SM Protocol Independent Multicast-Sparse Mode Point Of Presence Packet Over SDH/SONET Point-to-Point Protocol Priority Queue Protocol Transfer...
- Page 77 ATN 905 Multi-service Access Equipment Product Description A Acronyms and Abbreviations Service Advertising Protocol SCSR Self-Contained Standing Routing Synchronous Digital Hierarchy SDRAM Synchronous Dynamic Random Access Memory Switch Fabric Unit Service Level Agreement SNAP SubNet Attachment Point SNMP Simple Network Management Protocol...
- Page 78 ATN 905 Multi-service Access Equipment Product Description A Acronyms and Abbreviations VBR-RT Real Time Variable Bit Rate Virtual Circuit Virtual Channel Identifier Variable Dispersion Compensator VLAN Virtual Local Area Network Virtual Leased Line Virtual Path Identifier VPLS Virtual Private LAN Service...