Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei SmartAX MA5671
Summary of Contents for Huawei SmartAX MA5671
-
Page 1: Quick Start
SmartAX MA5671 Desktop Multi-service Access Equipment Quick Start... -
Page 2: Safety Precautions
Safety Precautions To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device. Safety precautions: Do not look into the optical port without eye protection. ... - Page 3 Do not change the structure, safety design, or performance design of the device without prior authorization. Fireproof precautions: Keep the device away from large heat source equipment, bare flames, and high-power devices, such as electric heaters, candles, and blow drier, to eliminate safety risks.
- Page 4 Mounted onto a Wall Step 1 Mark the positions of two holes (with a space the same as that between wall-mounting holes) used for mounting the MA5671. Step 2 Select a proper drill according to the outer screw diameter. Use a hammer drill to drill the marked positions on the wall.
-
Page 5: Connecting Cables
Connecting Cables... - Page 6 Performing the Following Steps to Connect the MA5671 to Each Product Based on the Preceding Cable Connections Step 1 Use an optical fiber to connect the OPTICAL port on the MA5671 to the optical port in the wall. NOTE The optical fiber connector connected to the OPTICAL port must be of the SC/UPC type.
-
Page 7: Logging In To The Web Page
Logging In to the Web Page Performing the Following Steps to Log In to the MA5671's Web Page Step 1 Set the IP address of the PC to be in the same network segment as the management IP address of the MA5671. For example: ... - Page 8 Indicator Status Description See Table 5-2. See Table 5-2. LAN1 through LAN4 Steady on The Ethernet ports are properly connected. Blinking The Ethernet ports are transmitting or receiving data. The Ethernet ports are disconnected. Both PON and LOS indicators indicate the status of the MA5671 in connecting to and registering with the optical line terminal (OLT) of the service provider.
-
Page 9: Technical Specifications
FAQs The LOS indicator is blinking. If the LOS indicator blinks once two seconds, check whether the pigtail is securely connected and whether the optical connector is clean. If the MA5671 blinks twice a second, check whether it is a rogue ONU. The PON indicator is off. -
Page 10: Warranty Card
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition. PERSONAL OR COMPANY FULL NAME Address/Postal Code Telephone Number... -
Page 11: Limited Warranty
Limited Warranty Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (referred to as Huawei) warrants its access terminals ("Products") to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product ("Warranty period"). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge. - Page 12 No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.