Optical Module; Instructions On How To Use An Optical Module - Huawei NE40E Hardware Description

NE40E
Hardware Description
Attribute
Working mode
Compliant
standard
Frame format
Table 1-1669 Board specifications
Item
Dimensions (H x W x D)
Typical power
consumption
Typical heat dissipation
Weight
Ambient temperature

1.11 Optical Module

This chapter presents the optical module.

1.11.1 Instructions on How to Use an Optical Module

This section describes instructions on how to use an optical module.
ESD-preventive Measures
Before touching any optical module, wear an ESD wrist strap or ESD gloves. Take full
ESD-preventive measures when installing optical apparatus such as optical modules indoors
or outdoors.
Methods of wearing ESD gloves
Issue 01 (2018-05-03)
Description
Full-duplex
IEEE 802.3
Ethernet_II, Ethernet_SAP and Ethernet_SN/AP
Only optical modules matching Huawei products can be used. These optical modules are strictly tested
by Huawei. If non-matching optical modules are used, device requirements may fail to be met, and
services may fail to run properly. To replace optical modules, see Parts Replacement-Replacing an
Optical Module.
Specification
40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x
21.09 in.)
584.5 W
1896.4 BTU/hour
11 kg (24.26 lb)
Long terms: 0 ° C to 45 ° C (32° F to 113° F) Short terms:
-5 ° C to 55 ° C (23° F to 131° F)
Methods of wearing ESD wrist strap
1 Hardware Description
869