Ac Pm - Huawei NE40E Hardware Description

NE40E
Hardware Description
Note the derating requirements of protection components when using protection components
such as fuses and circuit breakers. If the current of a PDF is less than 63 A, it cannot supply
power to the NE40E-X16A. In this case, reconstruct power supply in the equipment room.

1.8.6.5 2700 W AC PM
The PM accesses external AC power through PEMs, the PMs convert AC power into
regulated DC power and output the power to the power supply backplane.
Overview
Table 1-83 Power attributes
Attribute
Description
BOM
Model
Table 1-84 Mapping products and versions
Product
NE40E-X8A
NE40E-X16A
Appearance
Figure 1-66 shows the appearance of a AC PM module.
Issue 01 (2018-05-03)
If the front-end PDF does not provide enough power inputs, configure a PDB that meets
the following requirements:
The current of each channel output by the DC PDB is not less than 63 A.
−
− Double-channel backup is used.
− The input current is not less than the sum of current of its connected output lines.
Description
2700W AC Power module
02310SHP
PAC-2700WB
Earliest Software Version
V800R006C10
V800R006C10
1 Hardware Description
162