Huawei NE40E Hardware Description page 648

NE40E
Hardware Description
Functions and
Features
capability
Slot information
Reliability and
availability
Restrictions and
remarks
Technical Specifications
Table 1-1051 Interface specifications
Attribute
Optical type
supported
Working mode
Compliant
standard
Frame format
Table 1-1052 Board specifications
Item
Dimensions (H x W x D)
Typical power
Issue 01 (2018-05-03)
Remarks
receiving.
The board occupies one half-width flexible card slot.
Hot swappable.
Each LPUF-120 supports only one such card, and each LPUF-240
supports two such cards. The mix use of enhanced-i-4 and
enhanced-i-7 for interfaces on the same card is not supported.
Description
1.11.12 10Gbps SFP+ Optical Module
1.11.13 10Gbps SFP+ CWDM Optical Module
1.11.14 10Gbps SFP+ BIDI Optical Module
1.11.16 10Gbps SFP+ OTN Optical Module
1.11.15 10Gbps SFP+ DWDM Optical Module
NOTE
When the OTN rate is used, 10 Gbps SFP+ DWDM optical modules and 10
Gbps SFP+ OTN optical modules are supported.
When the LAN rate is used, 10 Gbps SFP+ BIDI optical modules, 10 Gbps
SFP+ CWDM optical modules, 10 Gbps SFP+ optical modules, and 10 Gbps
SFP+ DWDM optical modules are supported.
Full-duplex
ITU-T G.709, ITU-T G.798, ITU-T G.806, ITU-T G.975, ITU-T
G.Sup43
10G base-R(GFP-F)<->OPU2<->ODU2<->OTU2, 10G
base-R(GFP-F)<->OPU2e<->ODU2<->OTU2 and 10G
base-R(GFP)<->OPU2<->ODU2<->OTU2
Specification
37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61
in.)
56.0 W
1 Hardware Description
634