Huawei NE40E Hardware Description page 875

Hide thumbs Also See for NE40E:

Table of Contents

Hardware Description

Table 1-1647 Mapping products and versions

Table 1-1648 Buttons

100GE Breakout

Table 1-1649 Indicators

0 to 7 (green)

0 to 9 100GE

Breakout (green)

Issue 01 (2018-05-03)

Earliest Software Version

Board removal button. To remove a board, hold down the OFL

button for about 6s until the OFL indicator turns on, and then remove

When you press the button, the Breakout indicators stop status

cycling and remain in the current status. Then, each time you press

the button, the Breakout indicators' status switches. If you do not

press the button in 60s, the Breakout indicators automatically start

status cycling.

If the indicator is steady on, the board can be removed.

If the indicator blinks once every 2s (0.5 Hz), the system is running

properly. If the indicator blinks twice every second (2 Hz), the board

is starting and has not completed registration.

If the indicator is steady on, the link is Up. If this indicator blinks,

data is being transmitted or received. If the indicator is off, the link is

Breakout 0-9: breakout indicator. If breakout indicator X is on, the

interface indicators are showing the running status of breakout

channel X. For example, if breakout indicator 0 is on, interface

indicators are showing the running status of breakout channel 0 (if an

1 Hardware Description

Show Quick Links

Table of Contents