Direct Station Selection (Dss) - AT&T System 25 User Manual

Direct Station Selection (DSS)

DSS buttons allow numbers to be stored in the memory system
so you can make calls without dialing the digits. There are two
kinds of DSS buttons: fixed and flexible. Fixed DSS buttons,
, are extension numbers or access codes programmed by
DSS
the System Administrator. Flexible DSS buttons,
allow you to program extensions and other System 25 access
codes. (You cannot program Pooled Facility Access codes on a
DSS button.)
For instructions on how to program information in
buttons, see the section titled "Programming Numbers".
Placing Calls
When DSS Buttons Are Not Lit
Listen for dial tone.
1
Press or
2
DSS FLEX DSS
When DSS Buttons Are Lit
Do not lift the handset.
1
Press or
2
DSS FLEX DSS
Your phone will ring once when the other person
NOTE:
hangs up. Lift the handset and your call will be placed
automatically.
Display
When you press a
shows the programmed number and the name associated with
the number just as it does for any internal call.
When you receive a Busy-to-Idle Reminder, the information
flashes on the display, preceded by "I".
.
or
DSS FLEX DSS
1305 Asay,J
FLEX DSS
FLEX DSS
button, the display
,
51