Direct Station Selection (Dss) - AT&T SYSTEM 25 User Manual

Direct Station Selection (DSS)

There are two kinds of DSS buttons–Fixed and Flexible. Fixed
DSS buttons,
Administrator. Flexible DSS buttons,
program frequently called PDCs and other System 25 access
codes. If the green light is on next to these types of buttons,
you can activate a busy-to-idle reminder. This reminder lets you
know when you can make your call.
For instructions on how to store
section titled Programming Numbers on page 38.
Placing a Call Using Direct Station Selection
1 Lift the handset and listen for dial tone.
2 Press
Activating a Busy-to-idle Reminder
1 Do not lift the handset.
2 Press
are PDCs programmed by the System
or
or
Your voice terminal will ring once when the
other person hangs up and your call will be
placed automatically when you lift the
handset.
allow you to
numbers, see the
15