Defining Clusters And Stocksets With Pdl And Djde; Pdl Commands; Djdes - Xerox 721P85530 Description

Defining clusters and stocksets with PDL and DJDE

PDL commands

DJDEs

XEROX DOCUPRINT 180 LPS PDL REFERENCE
The PDL commands and DJDEs listed here relate to clusters. For
more detailed information on each command, refer to the chapters
"Specifying output parameters" and "Specifying dynamic job
descriptor entries (DJDEs)."
The STOCKSET and OUTPUT commands specify cluster and stocks
in your JSLs.
The STOCKSET and OUTPUT commands and their syntax are
shown in tables 5-2 and 5-3.
Table 5-2. STOCKSET parameter(s) and option(s)
Parameter(s) Option(s)
ASSIGN = { stock-descriptor | ( stock-descriptor
descriptor
{ stock-name | stock-reference }
INIFEED =
SYSPAGE = { stock-name | stock-reference | MAIN | AUX}
Table 5-3. OUTPUT parameter(s) and option(s)
Parameter(s) Option(s)
FEED = { stock-reference | ( stock-name | MAIN | AUX |
OPR}
stockset-name
STOCKS =
The FEED and STOCKS dynamic job descriptor entries change
stocks and clusters on a page-by-page basis.
The FEED and STOCKS commands and their syntax are shown in
table 5-4.
Table 5-4. STOCKSET parameter(s) and option(s)
Parameter(s) Option(s)
{ stock-reference | stock-name | MAIN | AUX |
FEED =
OPR}
STOCKS = stockset-name
DEFINING CLUSTERS
][,...])}
2
[, stock-
1
5-5