Table of Contents
Advertisement
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
OPRINFO
PREFIX
8-8
This parameter specifies whether the DJDE record is to be printed to
the tray or not.
Syntax
OPRINFO = option(s)
Options
Table 8-5 lists the parameter option(s) and definition(s).
Table 8-5.
Option(s)
YES
NO
All system-generated pages, such as accounting sheet, error
summary, OPRINFO, recovery marker, and report separator are
printed in the same xerographic mode as the previous page to
prevent unnecessary xerographic mode switching (XMS). The
exception to the rule is when the default ink is a primary color and the
previous page's xerographic mode is BLACK. Accounting sheets
always print using the system default 'BLACK' ink. The ink used to
print all other system generated pages depends on the xerographic
mode of the previous page and the default ink.
This parameter specifies an sc identifier, which is the search criterion
for recognizing DJDE records. It is a byte string of up to 255
characters represented as a hexadecimal, octal, BCD, ASCII, or
EBCDIC character constant (as described in the "Right-part
constants" section of the "Overview" chapter).
Syntax
PREFIX = option(s)
Options
Table 8-6 lists the parameter option(s) and definition(s).
Table 8-6.
Option(s)
sc
OPRINFO parameter option(s) and definition(s)
Definition(s)
Specifies that the DJDE record is to be printed and
delivered to the tray.
Specifies that the DJDE record will not be printed.
The default is NO.
PREFIX parameter option(s) and definition(s)
Definition(s)
Any records within the data stream which contain an
identification field equal to the specified prefix string
sc are recognized and processed as DJDE records.
There is no default.
XEROX DOCUPRINT 180 LPS PDL REFERENCE
Advertisement
Table of Contents
