Pmode; Rform - Xerox 721P85530 Description

PMODE

RFORM

XEROX DOCUPRINT 180 LPS PDL REFERENCE
This parameter specifies the printing mode for each page.
LANDSCAPE indicates that printing is to be parallel to the long edge
of paper. PORTRAIT indicates that printing is to be parallel to the
narrow edge of paper. If PMODE is changed through a DJDE
command, the BEGIN command should be respecified (even if the
same horizontal and vertical position has been specified in the
previous BEGIN parameter).
Syntax PMODE = option(s)
Options Table 8-42 lists the parameter option(s) and definition(s).
Table 8-46. PMODE parameter option(s) and definition(s)
Option(s)
LANDSCAPE Indicates that printing is to be parallel to the long
PORTRAIT
This parameter specifies a form to be printed with all RTEXT pages.
It takes effect on the next RTEXT page. The parameters are the
same as for the ROUTE command defined in the chapter "Print
format commands."
Syntax RFORM = option(s)
Options Table 8-43 lists the parameter option(s) and definition(s).
Table 8-47. RFORM parameter option(s) and definition(s)
Option(s)
form-id
NONE
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
Definition(s)
edge of paper.
Indicates that printing is to be parallel to the narrow
edge of paper.
Definition(s)
This is the name of a file cataloged in the FRM
directory. It is created by compiling a file of forms
source commands, called a JSL, with the FDL
compiler. (Refer to the DocuPrint 180 LPS Forms
Creation Guide.) The RFORM parameter is not
allowed in a ROUTE command which is being
defined as a cataloged file but is specified in the
ROUTE command in the JSL invoking the
cataloged RTEXT file. Refer to the "Cataloged
RTEXT files" section in this chapter for further
details.
Specifies that no form is to be printed.
The default is NONE.
8-55