Message Command - Xerox 721P85530 Description

PRINT FORMAT COMMANDS

MESSAGE command

Parameter
ITEXT
OTEXT
BTEXT
6-42
The MESSAGE and ROUTE commands permit the user to inform the
operator of special conditions. The MESSAGE command displays
user-defined text to the operator.
Example The following MESSAGE command informs the operator that blue
paper is required for copy 2 of a 4 copy report. Printing is suspended
at the appropriate points so that the operator can load the paper.
OUTPUT
MESSAGE
Table 6-33 summarizes the MESSAGE command parameters.
Table 6-33. Summary of MESSAGE command parameters
Specifies
Message to the operator during input processing
Message to the operator during job printing
Specifies audit log data to the UI
The following sections describe the syntax of the command
parameters and explanations of the parameter options.
Note: All "MESSAGE" command parameters must be specified in
a single command. If multiple message commands are specified, the
parameters in the final command will be applied.
Note: DocuPrint 180 LPS does not support the barcode option.
Barcode commands which are encountered by the DocuPrint 180
LPS controller will be gracefully ignored (no syntax errors will be
noted, no messages or operator information pages will be
generated).
COPIES = 4;
ITEXT = ('COPY 2 WILL NEED BLUE PAPER'),
OTEXT = ('LOAD BLUE PAPER', 2, WAIT),
OTEXT = ('LOAD WHITE PAPER', 3, WAIT);
XEROX DOCUPRINT 180 LPS PDL REFERENCE
Offline Online DJDE
Y Y Y
Y Y Y
Y Y Y