Sefmap - Xerox 721P85530 Description

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)

SEFMAP

8-58
This parameter specifies a mapping table different than the one
defined in the PDL command on a page-by-page basis.
Syntax SEFMAP = option(s)
Options Table 8-46 lists the parameter option(s) and definition(s).
Table 8-50. SEFMAP parameter option(s) and definition(s)
Option(s)
(( font , font
1
,[ font , font
m
[,UPD | REP]
NONE
Considerations Refer to the SEFMAP examples at the end of this section.
Definition(s)
) This option has the following components:
2
])
n
•
font , font
1 2
Font pair in which font
font .
1
•
font , font
m n
Font pair in which font
font .
m
•
UPD
(Update) indicates that the specified font pairs
change existing mappings or append new
mappings to the current font mapping table.
•
REP
(Replace) indicates that the specified font pairs
create a new mapping table to replace the
current one. REP is the default.
With UPD or REP, only memory-resident font
mapping tables (not disk-resident tables) are
affected.
Disables short-edge feed (SEF) and font mapping
(stops a previous SEFFNT).
XEROX DOCUPRINT 180 LPS PDL REFERENCE
is the SEF mapping for
2
is the SEF mapping for
n