Offset - Xerox 721P85530 Description

OFFSET

XEROX DOCUPRINT 180 LPS PDL REFERENCE
This parameter specifies offset control on a report basis.
Syntax OUTPUT OFFSET = option(s)
Options Table 6-55 lists the parameter option(s) and definition(s).
Table 6-56. OFFSET parameter option(s) and definition(s)
Option(s)
ALL
FIRST
NONE
The OFFSET control of FIRST, ALL, or NONE may be modified by
the ROFFSET command (refer to the "Report offsetting on a record"
section in the chapter "Using logical processing commands"). If
OFFSET=FIRST or ALL and ROFFSET criteria is satisfied on page
one of a report, the normal offset from the preceding report is
nullified. No change should be made to the OFFSET parameter in a
selected JDE.
Definition(s)
Results in an offset of each copy of each report.
The default is ALL.
Specifies that an offset is to occur only on the first
copy of a report.
Specifies that there is to be no offset at any time.
PRINT FORMAT COMMANDS
6-73