Invert - Xerox 721P85530 Description

INVERT

XEROX DOCUPRINT 180 LPS PDL REFERENCE
The parameters T, H, and n/d are not order dependent. They may be
coded as needed without extra position holding commas.
If the UN parameter is used to define position, the UNITS parameter
must precede this command in the OUTPUT command.
Example
IMAGE=(IMG1, 3, 2), END;
This parameter specifies that the following pages are to be inverted.
When specified in a DJDE data stream (page oriented), this feature
allows the DocuPrint 180 to invert the image on a physical page by
180 degrees.
Syntax INVERT = option(s)
Options Table 8-32 lists the parameter option(s) and definition(s).
Table 8-36. INVERT parameter option(s) and definition(s)
Option(s)
FRONT
BACK
BOTH
NONE
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
Definition(s)
Specifies page inversion on front sides.
Specifies page inversion on back sides.
Specifies page inversion on both front and back
sides.
Specifies turning page inversion off.
8-47