Stocks - Xerox 721P85530 Description

PRINT FORMAT COMMANDS

STOCKS

6-80
This parameter defines the stockset and its associated stock(s) to be
used in a report. If the stockset-name does not reference a
STOCKSET command coded earlier in the same JDL, the system
assumes that the stockset exists globally as an STK file, which is
read at print time. In this case, PDL inserts a message in the JSL file
listing, indicating that an STK file will be used at print time.
Whenever a new stockset is chosen at start of report or through a
DJDE JDE and JDL switch, each stock is checked to determine that
the stock exists and can be made active. This provides an automatic
method of changing stocks in the LPS as required by the data
stream.
Refer to the "STOCKSET command" section in the chapter "Defining
clusters" for additional information on defining stocks.
OUTPUT STOCKS = option(s)
Syntax
Options Table 6-64 lists the parameter option(s) and definition(s).
Table 6-65. STOCKS parameter option(s) and definition(s)
Option(s)
stockset-
name
Definition(s)
Specifies the stockset to be used.
There is no default.
XEROX DOCUPRINT 180 LPS PDL REFERENCE