Default; Point To Note - Xerox 721P85530 Description

SPECIFYING INPUT PARAMETERS

DEFAULT

Point to note

4-10
This parameter specifies a base code from which code assignment
exceptions can be made. The base code is specified by a code-type;
the exceptions are specified using the ASSIGN parameter.
CODE DEFAULT = option(s)
Syntax
Options Table 4-15 lists the parameter option(s) and definition(s).
Table 4-15. DEFAULT parameter option(s) and definition(s)
Option(s)
code-type
Multiple user-defined code translation tables are allowed, but only
one may be without a command identifier. The corresponding CODE
and LCODE parameters of the VOLUME command are used to
reference each user-created code table by a command identifier. The
USER option of the CODE and LCODE parameters of the VOLUME
command are used to reference a user-defined code translation table
in which no command identifier is coded.
Definition(s)
This option can be one the following:
•
EBCDIC
•
ASCII
•
BCD
•
PEBCDIC
•
H2BCD
•
H6BCD
•
IBMBCD
•
value
A value is a one-byte hexadecimal, octal, or
alpha constant. If a value is specified, all inputs
are coded to the specified value .
The DEFAULT parameter must be coded prior to any
ASSIGN parameter for the assignment exceptions to
come into effect. A DEFAULT parameter following
any defined corresponding ASSIGN input or output
parameter options causes this correspondence to be
replaced by the DEFAULT parameter.
The default is EBCDIC.
XEROX DOCUPRINT 180 LPS PDL REFERENCE