Table of Contents
Advertisement
COLLATE
COPIES
XEROX DOCUPRINT 180 LPS PDL REFERENCE
This parameter specifies whether pages are to be collated or
uncollated.
Syntax
OUTPUT COLLATE = option(s)
Options
Table 6-38 lists the parameter option(s) and definition(s).
Table 6-39. COLLATE parameter option(s) and definition(s)
Option(s)
YES
NO
Refer to the "Points to note" section in this chapter for additional
information.
This parameter specifies the number of report copies to be printed.
Syntax
OUTPUT COPIES = option(s)
Options
Table 6-39 lists the parameter option(s) and definition(s).
Table 6-40. COPIES parameter option(s) and definition(s)
Option(s)
number
Definition(s)
Specifies that the output pages are collated
The default is YES.
Specifies that the output is not collated. If
DUPLEX=YES, then COLLATE=NO is ignored.
Note that if NTO1=YES, PDL overrides
COLLATE=NO with COLLATE=YES and notes this
action with a warning in the JSL.
Definition(s)
An integer value with range 1 (the default) to 32767.
For the copies DJDE parameter, a value of 0 may be
specified for the DJDE COPIES parameter, in which
case no copies are printed. The copies parameter on
the START command allows an operator to override
this parameter when initiating a print job.
The default is 1.
PRINT FORMAT COMMANDS
6-59
Advertisement
Table of Contents
