Snumber - Xerox 721P85530 Description

SNUMBER

XEROX DOCUPRINT 180 LPS PDL REFERENCE
This parameter specifies that the printer merge the current segment
sequence number (beginning with 001) into any separator sheets
produced. The format of the printed segment sequence number for
all separators except a LAST separator in the last segment is:
PART nnn (8 characters). nnn is a three digit number with leading
zeros.
The format for the LAST separator in the last segment is: PART nnn
of nnn (15 characters).
Syntax EXPORT SNUMBER = option(s)
Options Table 6-20 lists the parameter option(s) and definition(s).
Table 6-20. SNUMBER parameter option(s) and definition(s)
Option(s)
( lnum , cnum
[, findex ])
Example
SNUMBER=(1,75);
Considerations Note that lnum and cnum are interpreted using the metrics of the font
specified by findex (the same as with page numbering).
Refer to the "Points to note" section in this chapter for additional
information.
Definition(s)
This option has the following components:
•
lnum
Specifies the integer line number on which the
segment sequence number string is to start.
•
cnum
Specifies the integer column number on which
the segment sequence number string is to end.
•
findex
Specifies the fontindex of the font to be used for
printing the segment sequence number string. If
not specified, the first font in the page's font list
is used.
There is no default.
PRINT FORMAT COMMANDS
6-25