Forms - Xerox 721P85530 Description

PRINT FORMAT COMMANDS

FORMS

6-66
This parameter specifies forms to be associated with the report
copies. Different forms may be associated with different copies of a
report by the use of multiple FORMS left parts on the same OUTPUT
command.
Syntax OUTPUT FORMS = option(s)
Options Table 6-48 lists the parameter option(s) and definition(s).
Table 6-49. FORMS parameter option(s) and definition(s)
Option(s)
form-id |
( form-id ,[ init ] [, copies ] |
NONE
Note: To ensure reliability, enter the entire parameter FORMS. Do
not abbreviate to "FOR".
Example
OUTPUT FORMS=(FORM3,3,2,);
Definition(s)
This option consists of:
•
form-id
Specifies a 1 to 6 character file name (may be
numeric, alpha, or alphanumeric) which exists
on disk. This file is created by compiling a forms
description language source file, called an FSL
file, with the FDL system task (refer to the Xerox
LPS Forms Creation Guide for further details on
FDL).
•
init
Specifies the beginning ply (pass) number to
which a specified form applies. This defaults to
the first or next copy. If the copies parameter is
not specified, the last (or only) specified form
applies to all copies beginning with copy
number init. If the form is not the last one
specified, copies defaults to 1. If neither init nor
copies is specified, the form applies to all
copies of the report.
•
copies
The number of copies of the report to be
printed.
•
NONE
Means that no form is added to the associated
report page of variable data.
The default is NONE.
XEROX DOCUPRINT 180 LPS PDL REFERENCE