Pdl Error - Xerox Phaser 6125 Service Manual

PDL Error

Phaser 6125/6130 Color Laser Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
Check the memory card capacity. Print
3
the printer Configuration Page:
> Information Pgs
Is the memory capacity correct,
including the optional memory?
Replace the memory card. Does the
4
error still occur?
Error relating to Printer Command Language (PCL) has occurred.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL8.1.9
Troubleshooting Procedure Table
Step Actions and Questions
Check the print job.
1
1. Print a small print job (like a
Windows test print).
2. Does the error still occur?
Reseat plugs and jacks on the Image
2
Processor Board.
Does the error still occur?
Menu
> Configuration.
016-720: PDL Error
Wiring and Plug/Jack Map References
"Map 3 - LVPS, Drive Motors, I/P Board, AC
Power" on page 10-10
"Controller" on page 10-31
Error Messages and Codes
Yes No
Go to step 4. Replace the
Image
Processor
Board
(page 8-60).
Replace the Complete.
Image
Processor Board
(page 8-60).
Yes No
Go to step 2. Complete.
Replace the Complete.
Image
Processor Board
(page 8-60).
3-23