Xerox 4520 User Manual page 96

I n t e r f a c e M e n u
Parallel Menu
Options
Figure 3.12 Parallel Menu options showing factory settings
Option
Port Enable
Port Timeout
System Language
3-42 4 5 2 0 / 4 5 2 0 m p U s e r ' s G u i d e
The Parallel Menu, a submenu of the Interface Menu,
Figure 3.11 (page 3-39), contains options for configuring the
printer's bidirectional parallel port.
Figure 3.12 describes each Parallel Menu option. Factory
settings are boldfaced and followed by an asterisk (*). See
"Setting a Menu Option" (page 3-10) for the steps to find and
change a setting, or refer to the Document Services for
Printing Guide to use the RUI to change settings.
Setting
Off
On*
5-999 secs (30*)
PCL*
†
PostScript
†
Appears only when the
PostScript option is
installed.
Description
Activation of the parallel port.
When On, the parallel port is enabled so that the
printer can receive print jobs through it.
The parallel port becomes part of a port polling
sequence that includes all ports. See Appendix C: I/O
Port Polling for information.
When Off, the port is disabled so no communication
occurs through this port with the host. If you are not
using the parallel port, you can set Port Enable Off.
Time interval for determining when to end an
incomplete print job and poll the next port in the
polling sequence.
Port Timeout works in conjunction with Auto Job
End (page 3-44).
See Appendix C: I/O Port Polling for more
information.
Page description language (PDL) the printer will use
for print jobs coming through the parallel port.
When Lang. Sensing (page 3-43) is On, System
Language is used only when the printer cannot
detect the PDL used in the incoming print job.