D i s p l a y e d C o n t r o l P a n e l M e s s a g e s
Figure 7.2
Control Panel messages (continued)
Message
Warning 300/A5
Warning 300/B4
Warning 300/B5
Warning 300/C10
7-20
4 5 2 0 / 4 5 2 0 m p U s e r ' s G u i d e
This message appears in PCL when the printer has changed resolution to 300 or
page protection to A5; appears in PostScript when the page size is A5 and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to B4; appears in PostScript when the page size is B4 and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to B5; appears in PostScript when the page size is B5 and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Com-10; appears in PostScript when the page size is Com-10
and the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Description/Action