Xerox 4520 User Manual page 203

Figure 7.4 Paper jam procedures
Message Displayed on
Control Panel
Open HCF Cover
Clear Paper Path
or
Open HCEF Cover
Clear Paper Path
Paper Jam MBF
Clear Paper Path
Open Rear Cover
Clear Paper Path
alternating with
Paper Fed From
Upper Tray
(or Middle Tray or Lower
Figure 7.4 lists control panel messages associated with paper
jam clearing procedures along with an explanation of each
message. To clear a paper jam message you should do the
following:
• Locate the correct control panel message in Figure 7.4.
• Perform, in sequence, all the steps indicated.
Message Explanation
A feed command was sent to the
High-Capacity Feeder or High-Capacity
Envelope Feeder, but paper did not arrive at
the input sensor.
A paper jam has occurred while feeding
form the MBF. The paper did not reach the
input sensor.
A paper jam has occurred as paper was
leaving a paper tray or a manual feed tray, or
immediately after leaving the paper tray or
manual feed tray.
Tray)
C h a p t e r 7 : T r o u b l e s h o o t i n g
P a p e r J a m s
Steps to Clear Jam
2, 2a, 2b, 2c (page 7-32)
5, 5a, 5b (page 7-36)
6, 6a, 6b (page 7-37)
7 (page 7-39)
1b (page 7-30)
5, 5a, 5b (page 7-36)
6, 6a, 6b (page 7-37)
7 (page 7-39)
3, 3a, 3b, 3c (page 7-34)
4, 4a, 4b (page 7-35)
5, 5a, 5b (page 7-36)
6, 6a, 6b (page 7-39)
7 (page 7-39)
7-29