Xerox 4520 User Manual page 196

D i s p l a y e d C o n t r o l P a n e l M e s s a g e s
Figure 7.2 Control Panel messages (continued)
Message
Warning 300/LDG
Warning 300/LGL
Warning 300/LTR
Warning 300/OFF
7-22 4 5 2 0 / 4 5 2 0 m p U s e r ' s G u i d e
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Ledger; appears in PostScript when the page size is Ledger and
the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Legal; appears in PostScript when the page size is Legal and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Letter; appears in PostScript when the page size is Letter and
the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to OFF.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Description/Action