Xerox 4520 User Manual page 106

I n t e r f a c e M e n u
Ethernet Menu
Options
Note
3-52 4 5 2 0 / 4 5 2 0 m p U s e r ' s G u i d e
The Ethernet Menu, a submenu of the Interface Menu,
Figure 3.11 (page 3-39), contains options for configuring the
printer's Ethernet port, when the Ethernet option has been
installed.
The 4520mp printer is factory equipped with the Ethernet
option.
Ethernet is available as an option for the 4520 printer. See
Appendix D: Ordering Information.
The Ethernet option supports the following protocols:
• Novell NetWare, Version 2.x and 3.x
• TCP/IP
• EtherTalk
• DEC LAT
• Microsoft LAN Manager
For detailed information on the supported protocols, refer to
Networking: Ethernet packaged with the 4520mp printer or
with the Ethernet option kit.
Figure 3.15 (page 3-53) describes each Ethernet Menu
option. Factory settings are boldfaced and followed by an
asterisk (*). See "Setting a Menu Option" (page 3-10) for the
steps to find and change a setting, or refer to the Document
Services for Printing Guide to use the RUI to change settings.