Xerox 4520 User Manual page 120

T e s t M e n u
Figure 3.20 Test Menu functions (continued)
Function
Test Print
Memory Check
3-66 4 5 2 0 / 4 5 2 0 m p U s e r ' s G u i d e
"Test pattern" for analysis of print quality over the entire page; intended for use by
service technician.
The number of Test Prints produced is determined by Copies (page 3-19) and
printed from the Default Source (page 3-21), both specified in the PCL Menu. If
the System menu setting Defaults (page 3-61) is USA, Letter (8.5x11) paper is
used; otherwise, A4 paper is used.
Test Print will cause a printer reset, clearing any incomplete jobs.
Complete check of printer memory (resident and any SIMMs installed) and a
reporting of the results on the Control Panel display.
Memory Check is more extensive than the check performed when the printer is
powered on. When you invoke Memory Check, you will see:
Memory Check
Please Wait....
Before Memory Check, any partial pages are ejected and any incomplete print
jobs, permanently downloaded fonts, and macros are cleared from memory. After
Memory Check is finished, it reboots the printer to its power-on state.
If a problem occurs, the Control Panel will display a numeric diagnostic code. See
Chapter 7: Troubleshooting, "Displayed Control Panel Messages" (page 7-5), to
locate the diagnostic message associated with the numeric code.
Description