Xerox 4520 User Manual page 195

Figure 7.2 Control Panel messages (continued)
Message
Warning 300/C5
Warning 300/DL
Warning 300/EXE
Warning 300/FOL
D i s p l a y e d C o n t r o l P a n e l M e s s a g e s
This message appears in PCL when the printer has changed resolution to 300 or
page protection to C5; appears in PostScript when the page size is C5 and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to DL; appears in PostScript when the page size is DL and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Executive; appears in PostScript when the page size is Executive
and the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Folio; appears in PostScript when the page size is Folio and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
C h a p t e r 7 : T r o u b l e s h o o t i n g
Description/Action
7-21