Xerox 4520 User Manual page 115

Figure 3.18 System Menu options showing factory settings (continued)
Option
Auto Continue
Defaults
Setting
Off*
On
Europe
USA
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
Description
Control of the resumption of printing after system
errors occur.
Certain errors may occur that halt printer operations.
Two examples are:
Out of Memory
and
Page Too Complex.
When Auto Continue is Off, the printer does not
automatically resume. Enter
before normal printer operations can continue.
When Auto Continue is On, the printer automatically
resumes operation after certain system errors if
Enter is not pressed within ten seconds. The
On setting is useful in a networked environment.
Control of default paper size settings in various
menus.
There is no standard factory-set default for this
option; the default varies by world region.
When Europe, all paper size-related options are set to
A4 (210x297) and Form Length is set to 64.
When USA, all paper size-related options are set to
Letter (8.5x11) and Form Length is set to 60.
The Config. Sheet (page 3-64) is printed at Defaults
size, regardless of actual paper size.
Perform a Reset Menus (page 3-68) after
changing Defaults.
Note
S y s t e m M e n u
must be pressed
3-61