Xerox 4520 User Manual page 47

Factory-Set Source
Mapping Settings
Figure 2.18 Factory settings for Source Mapping
PCL Paper
Source
Upper
Manual
Manual Envelope
Lower
Large Capacity
Envelope Feeder
Note
Figure 2.18 shows the factory-set Source Mapping defaults
for the six PCL paper sources, and how the settings change
when the optional MBF, HCF, or HCEF is installed and
is implemented. See Chapter 3: Using the Control
Menus
Panel, "Reset Menu" (page 3-67).
Base Model With MBF
Up-Mid-Low Up-Mid-Low
Manual
Manual
Lower
Up-Mid-Low Up-Mid-Low
Manual
Only one of the SBF, MBF, HCF, or HCEF may be installed at
any time. Manual single-sheet feeding is possible with the
SBF, MBF, and HCF, but not the HCEF.
Install the Xerox printer driver to access the entire range of
PCL paper source and source mapping settings specifically
designed for the 4520/4520mp printers. Refer to the
Document Services for Printing Guide.
C h a p t e r 2 : H a n d l i n g P a p e r
S e l e c t i n g a P a p e r S o u r c e
With HCF
HCF-Up-Mid-Low
MBF Manual
MBF Manual
Lower Lower
HCF
MBF Manual
Reset
With HCEF
Up-Mid-Low
HCEF
HCEF
Lower
Up-Mid-Low
HCEF
2-35