Xerox 4520 User Manual page 107

Figure 3.15 Ethernet Menu options showing factory settings
Option
Port Timeout
System Language
Lang. Sensing
Setting
5-999 secs (30*)
PCL*
†
PostScript
†
Appears only when the
PostScript option is
installed.
Off
On*
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
Description
Time interval for determining when to end an
incomplete print job and poll the next port in the
polling sequence.
Port Timeout works in conjunction with Auto Job
End (page 3-54).
See Appendix C: I/O Port Polling for more
information.
Page description language (PDL) the printer will use
for print jobs coming through the Ethernet port.
When Lang. Sensing (page 3-53) is On, System
Language is used only when the printer cannot
detect the PDL used in the incoming print job.
Automatic recognition of the page description
language (PDL) used in an incoming print job.
When On, if the Ethernet port receives print jobs of
different PDLs—such as a PostScript print job followed
by a PCL print job—it can automatically sense which
PDL the print job is using. It does this by sampling the
incoming data stream, then switching to the
perceived language for that job or to the System
Language setting if it fails to sense the language.
When On, if State Saving (page 3-28) in the PCL
Menu or State Saving (page 3-37) in the PostScript
Menu is also On, the permanently downloaded fonts
and macros are saved in memory, eliminating the time
to download them again when switching occurs
between PDLs.
I n t e r f a c e M e n u
3-53