Loading
Letterhead,
Pre-printed,
Drilled, or Label
Paper
Figure 2.13 illustrates the paper orientation needed to print
letterhead, pre-printed stationery, or drilled paper in the
upper, middle, or lower tray. (Labels are not supported in
these trays. See Figure 2.14, page 2-28.)
Figure 2.13 Loading letterhead, pre-printed stationery, or
drilled paper in the upper, middle, or lower tray
Of course, you may need to adjust your software application's
printing margins to:
•
Prevent overwriting the letterhead or pre-printed images.
•
Prevent overwriting the drilled holes.
C h a p t e r 2 : H a n d l i n g P a p e r
L o a d i n g P a p e r
(face down)
2-27