Xerox 4520 User Manual page 191

Figure 7.2 Control Panel messages (continued)
Message
Replace
EP Cartridge
Reset Menus
Please Wait...
Reset Printer
Please Wait...
Self Test...
Temp Font/Macro
Test Print
Printing...
Token Ring Fail
D i s p l a y e d C o n t r o l P a n e l M e s s a g e s
The electronic printing (EP) cartridge, which contains toner and drum, has expired.
Printing cannot resume.
ACTION: Insert new EP cartridge (see page 6-3).
Reset Menus has been invoked from the Reset Menu (page 3-68).
Returns all menu settings except the Language (page 3-68) setting and the
System Menu Defaults (page 3-68) setting to their factory setting and clears any
print jobs, temporary fonts, and macros from memory.
ACTION: None
Reset Printer or Reset All has been invoked from the Reset Menu (page 3-68).
The printer clears any print jobs and temporary fonts and macros from memory,
then goes online.
ACTION: None
The printer is in power-on diagnostics. This message appears shortly after
power-on as soon as the Control Panel is initialized and can display text.
If there is no failure during power-on diagnostics, the next message displayed will
indicate the printer is online and ready to receive data.
ACTION: None
The printer was busy processing PCL data from a host system but the job was not
completed since temporary fonts and macros were not deleted. The last page
timeout has expired.
This message appears until:
• Another print job is received.
• The Port Timeout expires and Auto Job End is On. See Chapter 3: Using the
Control Panel, "Interface Menu" (page 3-38).
ACTION: None
A Test Print is being printed (for use by service technicians).
The message clears once the printing is completed.
ACTION: None
The Token Ring card (XNIC-T'RING) has failed and cannot be used.
ACTION: Press Enter
card were not installed. This error is not subject to Auto Continue (page 3-59).
Print a Configuration Sheet. If the sheet does not show Token Ring as present,
contact your dealer or Xerox / Rank Xerox.
C h a p t e r 7 : T r o u b l e s h o o t i n g
Description/Action
to allow the printer to continue as if the Token Ring
7-17