Omron SYSMAC C200H-TC Operation Manual page 84

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
1
1A
2
3
Downloaded from Elcodis.com electronic components distributor
Revision History
Cat. No. W225-E1-3
Date
August 1993 Original production
July 1995 Page 40: Note 1 corrected.
September 1996 Pages 35 to 39: Loop 1 STOP, Loop 2 STOP, and STOP data items added to
the tables.
Pages 39 and 40: EEPROM Write/Read Command title added to table and
the RAM Write Command table added.
Page 48: 4-3-5 I/O Refresh added.
March 2000 Added precautions to beginning of manual and changed "C200H PC" to either
"PC" or "CPU Unit" throughout the manual.
Page 3: Added a table of applicable CPU Units.
Page 4 : Modified number of units mountable on Slave Rack in the table.
Page 4 : Added information on new functions.
Page 9 : Added information on Stop Bits and Stop Flags.
Page 11: Changed screw tightening torque.
Pages 20, 21, 25: Changed descriptions of data setting.
Page 23: Added Stop Bit information to the Data Display note.
Page 30: Added Stop Bit information to Changing the Settings.
Page 34 : Added memory allocation information for the CS1.
Page 45 : Modified sample program for write request.
Page 49: Added programming examples for the CS1.
Page 53, 59: Changed SR bit and restart bit.
Page 53: Added information on cases where temperature control is not per-
formed.
Revision code
Revised content
77