Omron SYSMAC C200H-TC Operation Manual page 75

C200H-TC00
Set the thermocouple type with the switch on the rear panel.
This switch is factory-set to 2 (K).
The Data Setting Console can display the range from 10%FS below the lower limit to 10%FS above the upper limit.
Input
Range C 0 to 1,700
F 0 to 3,000
Switch
setting
C200H-TC10
Set the platinum resistance thermometer type with the switch on the rear panel.
This switch is factory-set to OFF (JPt100).
The Data Setting Console can display the range from 10%FS below the lower limit to 10%FS above the upper limit.
Input
Range C –99.9 to 450.0
F
Switch
setting
Downloaded from Elcodis.com electronic components distributor
Sensor Temperature Measurement Ranges
Thermocouple
R S
Platinum vs. Platinum Chromel vs.
platinum vs.
rhodium platinum
13% rhodium
10%
0 to 1,700 –200 to
1,300
0 to 3,000 –300 to
2,300
0 1 2
Platinum Resistance Thermometer
JPt100 Pt100
–99.9 to 450.0
–99.9 to 800.0 –99.9 to 800.0
OFF ON
Appendix B
K (CA) J/L (IC) T/U (CC)
Iron vs. Copper vs.
alumel constantan constantan
–100 to –200 to
850 400
–100 to –300 to
1,500 700
3/8 4/9
OFF
ON
E (CRC) B
Chromel vs. Platinum Nichrosil
constantan rhodium vs. nisil
30% vs.
platinum
rhodium 6%
0 to 600 100 to 0 to 1,300
1,800
0 to 1,100 300 to 0 to 2,300
3,200
5 6 7
N
67