Omron SYSMAC C200H-TC Operation Manual page 30

Wiring
Connection Precautions
Downloaded from Elcodis.com electronic components distributor
1, 2, 3...
1. Tighten the lock screws after inserting the connector into the Unit.
2. Push the connector firmly into the Data Setting Console until the clips fully
lock.
3. Power is supplied through the connecting cable from the Temperature Con-
trol Unit. Nothing appears on the Data Setting Console display if no power is
supplied to input terminals A8 and A9 of the Temperature Control Unit.
4. Install the supplied connector cover when the cable is not connected.
Section 2-3
19