Chapter 6: Solving Problems
To check the version of the Terminal Interface software
To check the version of the Terminal Interface
software
Type ver to display the version numbers of the Terminal Interface system software
and emulator software.
The MC6833x emulator firmware must be used with the correct version of the
emulation system and emulation analyzer firmware. See the paragraph titled, "To
ensure software compatibility" earlier in this chapter for more information.
If the emulator appears to be malfunctioning
Check to make sure that the cables connecting the Emulation Control Board to the
Emulation Probe are connected correctly.
Run the performance verification procedure as described in this chapter. If the
emulator fails this test, contact your Hewlett-Packard representative.
If the emulator passes the performance verification procedure, look for other
reasons for the problem. Performance Verification is a thorough test, but it cannot
find every hardware failure in the emulator. It is a good indication that the
emulator is functioning correctly, but if you are still convinced the emulator is
malfunctioning, contact your local Hewlett-Packard representative.
If you suspect the emulator is broken
Run the Performance Verification procedure as described in the first paragraph of
this chapter. If either the emulator or analyzer fail the performance verification,
check the installation of those modules. If the installation is correct, contact your
local HP Sales and Service office for assistance.
108