Table of Contents
Advertisement
In This Book
This manual covers the Hewlett-Packard Model 64782 emulator for the Motorola
MC6833x family of microprocessors. It is divided into the following parts:
Part 1, "Installation," shows you how to install and connect all of the
emulator/analyzer hardware in the card cage, connect the card cage to a host
computer in several typical configurations, and connect the emulator probe into the
demo board and into your target system.
Part 2, "Service," shows you how to install and update emulator/analyzer firmware,
solve problems you may encounter while using the emulator/analyzer, and obtain
replacement parts for the emulator/analyzer from Hewlett-Packard.
Part 3, "Terminal Interface Reference," introduces the interfaces available to use
with the emulator/analyzer, and shows you how to use the terminal interface for the
emulator/analyzer.
This manual replaces the Terminal Interface Reference which accompanied earlier
HP emulators. For information on the Terminal Interface, see Part 3.
You should read the book Concepts of Emulation and Analysis when you have the
chance to do so; it contains a good conceptual introduction to the emulation
process, and also describes how an emulation monitor works. Another book, the
HP 64700 Card Cage Installation/Service Guide, tells you more about installation
and configuration of the HP 64700 Card Cage. If you have a problem with the
emulator and don't understand how to fix it, a listing of HP Sales and Service
offices is in the Support Services Guide in the back of this binder.
viii
Advertisement
Table of Contents
