Table of Contents
Advertisement
What you need
Equipment supplied
The minimum system contains:
•
HP 64782 6833x PGA Emulator Probe
•
Demo target system (shipped with the emulator probe).
•
HP 64748C Emulation Control card.
•
HP 64794A/C/D Emulation-Bus Analyzer (deep analyzer) card, or
HP 64704A Emulation-Bus Analyzer (1K analyzer) card.
•
HP 64700A or HP 64700B Card Cage.
Optional parts are:
•
HP 64171A/64172A 256-Kbyte Memory Modules for additional memory
depth.
•
HP 64171B/64172B 1-Mbyte Memory Modules for additional memory depth.
•
HP 64173A 4-Mbyte Memory Modules for additional memory depth.
•
HP 64708A Software Performance Analyzer.
•
HP 64701A LAN Interface card (HP 64700A only).
Equipment and tools needed
In order to install and use the MC6833x emulation system, you need:
•
Flat-blade screwdriver with shaft at least 5 inches long (13 mm approx).
•
Torx T-10 screwdriver (if installing the optional LAN card for the
HP 64700A).
The illustrations in this manual show the HP 64700B Card Cage. The locations of
some components may be slightly different if you are using an HP 64700A Card
Cage.
Chapter 1: Preparing the Emulator
5
Advertisement
Table of Contents
