HP 64782 Series Manual page 7

Emulation memory
•
Up to 8 Mbytes of emulation memory
•
All emulation memory is dual-ported
•
Mapping resolution is 256 bytes
•
The wait states required for emulation memory depend on processor speed and
the access speeds of the SIMMs installed on the emulation probe, as shown
below:
SIMM Access Speed
35 nSEC
20 nSEC
25 nSEC
•
Fast termination cycles to emulation memory are supported up to 10 MHz
when using 20-nSEC and 25-nSEC SIMMs, and supported up to 8 MHz when
using 35-nSEC SIMMs
Runs with no Wait
States
0 to 16.78 MHz
0 to 25 MHz
0 to 22 MHz
Requires 1 Wait State
16.78 MHz to 25 MHz
25 MHz to 33 MHz
22 MHz to 30 MHz
vii