Table of Contents
Advertisement
Terminal Interface
The command interface present inside the HP 64700 Series emulators
that is used when the emulator is connected to a simple data terminal.
This interface provides on-line help, command recall, macros, and
other features which provide for easy command entry from a terminal.
TQFP
A thin quad flat pack is a type of integrated circuit.
Trace
A collection of states captured synchronously by the analyzer.
Transparent Configuration
The configuration in which the HP 64700 Series emulator is connected
between a data terminal and a host computer. When the emulator is in
the transparent (pass through) mode, the data terminal acts like a
normal terminal connected to the computer. In this configuration, you
can develop code on the host computer and download absolute code
into the emulator for debugging and testing.
Transparent Mode
The emulator mode in which all characters received on one port will be
copied to the other port. This mode allows a data terminal (connected
to one emulator port) to access a host computer (connected to the other
emulator port) through the emulator.
Trigger
The condition that identifies a reference state within an analyzer trace
measurement. Trigger also refers to the analyzer signal that becomes
active when the trigger condition is found.
Trigger signals called trig1 and trig2 are bidirectional signal lines that
can be used to coordinate measurement activity between emulators and
analyzers installed in the instrumentation card cage, and between
instruments connected to the BNC on the rear panel of the card cage.
Note that there is a delay when you use a trigger for measurement
coordination. For example, you may specify that the emulator break to
Glossary
Terminal Interface
157
Advertisement
Table of Contents
